December 02, 2024, 11:59:51 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Performance data/sequence channel  (Read 2843 times)

djboyko

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Performance data/sequence channel
« on: June 27, 2014, 02:54:04 pm »
HI Guys,
I use Beatstep with an old ,but powerful SYNTH module Roland xv 5080 which has a multi timbral mode.Also a TR 8 is connected thru midi.I
have assigned 16 midi instruments on each of the pads midi channel.THE BIGGEST MUST IS : TO BE ABLE TO CHANGE SEQUENCE CHANNELS IN REAL TIME WITH A KNOB?
Any idea when this will be fixed with a firmware update? Thank  you in advance :-)

GnollinZ

  • Apprentice
  • Apprentice
  • *
  • Posts: 23
  • Karma: 1
Re: Performance data/sequence channel
« Reply #1 on: June 27, 2014, 04:57:42 pm »
Do you mean change the MIDI channel used by the sequencer in real time?


djboyko

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Performance data/sequence channel
« Reply #2 on: July 01, 2014, 09:24:36 am »
yes,in real time,without a computer.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Performance data/sequence channel
« Reply #3 on: July 01, 2014, 02:46:07 pm »
Hi you can set the sequencer to be in global mode so you can change the channel of the sequencer to what instrument you want to play.
or just make a different sequence on each memory and midi channel.
i can get the sequence to play on what instrument i like by just changing the channel.
Think this is what you mean .

regards

terrym

TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

djboyko

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Performance data/sequence channel
« Reply #4 on: July 07, 2014, 09:33:41 am »
Thanks terrym.That one works.How about playing all the 16 midi channels at once,again with roland xv 5080.I have akai mpk49 controller and i am wondering how to use the Beatstep and MPK49 together.My idea is to be able to use beatstep as a sequencer and assign the 8 sliders of akai to 2 midi banks,therefore 16 channels and use the sliders to bring in and out each of the 16 instruments from roland multitimbral mode.Any ideas? thanks

teceem

  • Jr. Member
  • **
  • Posts: 58
  • Karma: 4
Re: Performance data/sequence channel
« Reply #5 on: July 13, 2014, 08:40:42 pm »
Do you use a DAW?
If not, I'm sure you can route 1 channel to multiple on a Midi Patchbay.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines