December 13, 2024, 11:02:24 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: CNTRL mode and midi control center problem  (Read 4397 times)

triff

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
CNTRL mode and midi control center problem
« on: July 03, 2014, 12:12:38 am »
my problem is simple, i'd like to setup my beatstep in CNTRL mode, but when i hit the first pad on the beastep, the second one is trigged in the MMC, and when i hit the second pad on the beatstep, the third one is trigged in MMC, etc...etc...

it's unusable! How can i do a global reset of the beastep?
How can i solve this?

Thanks!

Jerome Arturia

  • Administrator
  • Full Member
  • *****
  • Posts: 174
  • Karma: 0
Re: CNTRL mode and midi control center problem
« Reply #1 on: July 03, 2014, 09:02:10 am »
Hi!

Here's how to proceed to set your Beatstep back to default setup:

1/ Connect Your beat Step
2/ Open the MCCU:
==> http://www.arturia.com/downloads/mccu/
3/ Click on the "Sync" button
4/ Under Templates TAB/Factory Templates, Select "Default"

Let me know if you need further help!

triff

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: CNTRL mode and midi control center problem
« Reply #2 on: July 03, 2014, 01:05:24 pm »
Thanks Jerome!

i will try that...

And what can you say about my last post in the top topic: ressources for daws?
Seems that the beatstep have some trouble to be sync with a daw, or there's a kind of trick i guess?

SoundQuant

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: CNTRL mode and midi control center problem
« Reply #3 on: July 12, 2014, 07:59:47 pm »
Got the same problem. I fixed it by installing a older firmware version (Beat-Step-v1.0.1.4-20140311.led.zip).
I think it is a error in the new firmware version.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: CNTRL mode and midi control center problem
« Reply #4 on: July 12, 2014, 10:08:27 pm »
HI, i tested this, and i do not have this problem.
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

m.janowski

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: CNTRL mode and midi control center problem
« Reply #5 on: January 19, 2015, 11:33:01 pm »
Hi!

Here's how to proceed to set your Beatstep back to default setup:

1/ Connect Your beat Step
2/ Open the MCCU:
==> http://www.arturia.com/downloads/mccu/
3/ Click on the "Sync" button
4/ Under Templates TAB/Factory Templates, Select "Default"

Let me know if you need further help!

Hi Jerome. My Tab is just empty. I don't have any Factory Templates.

Minibrute / Prophet V / Spark VDM

WattSekunde

  • Apprentice
  • Apprentice
  • *
  • Posts: 18
  • Karma: 0
Re: CNTRL mode and midi control center problem
« Reply #6 on: February 01, 2015, 06:37:42 pm »
Got the same problem. I fixed it by installing a older firmware version (Beat-Step-v1.0.1.4-20140311.led.zip).
I think it is a error in the new firmware version.

Where can I find older firmware files?

Thanks!

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines