July 18, 2024, 12:30:04 am
Welcome, Guest. Please login or register

Arturia Forums

Author Topic: Aftertouch try, pitch bend broken and no aftertouch sentů fix  (Read 4848 times)


  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
So I tried to recalibrate my aftertouch with the instructions on pg 46 of the manual and was left with a keyboard that didn't transmit aftertouch and whose pitch wheel didn't work.  After spending about an hour searching the internet, I finally came across a solution in french.  Please translate and repost this page:


 To summarize: enter calibration mode: power while holding the Shift button and the Search button to select the after touch: press (forcefully) a key => 3 LED should light calibrate min: while exerting the desired minimum pressure, press "Octave -" calibrate max: while exerting maximum pressure desired, press "Octave +" Exit the calibration mode: press the search button Do not put immediately on (updated flash memory occurs after a slight delay)

After doing this, and waiting a bit, things started to work again and I did another initialize



Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines