October 05, 2024, 08:42:52 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: How to use SYNC between the two lines?  (Read 4059 times)

Patrice

  • Jr. Member
  • **
  • Posts: 63
  • Karma: 5
How to use SYNC between the two lines?
« on: May 20, 2009, 10:41:26 pm »
I'm trying to use SYNC to synchronize line 1 on line 2:

I use a sawtooth on both lines, line 2 is tuned to 8' and line 1 to 5' 1/2.
The level of line 2 is set to 0.
The rest is by default (no filters, no envelopes, no effects...).

Now, I can't hear any difference, between SYNC being on or off.

Am I missing something?

Dooley

  • Jr. Member
  • **
  • Posts: 78
  • Karma: 2
Re: How to use SYNC between the two lines?
« Reply #1 on: May 21, 2009, 07:03:01 am »
I just tried it and I can hear a difference, so I don't know what to say. I'm using version 1.6 if that matters.

Patrice

  • Jr. Member
  • **
  • Posts: 63
  • Karma: 5
Re: How to use SYNC between the two lines?
« Reply #2 on: May 21, 2009, 10:26:00 am »
I also use version 1.6.

I will do some more tests, starting from different presets...

Patrice

  • Jr. Member
  • **
  • Posts: 63
  • Karma: 5
Re: How to use SYNC between the two lines?
« Reply #3 on: May 21, 2009, 02:01:17 pm »
OK, I can hear it now but I expected something more spectacular.
It seems that with the fixed relative tuning of the two lines, SYNC is not very usefull.

Has someone found an interesting way of using SYNC?

Dooley

  • Jr. Member
  • **
  • Posts: 78
  • Karma: 2
Re: How to use SYNC between the two lines?
« Reply #4 on: May 22, 2009, 06:21:19 am »
I've haven't experimented with sync as of yet so I post out of ignorance but:

Doesn't sync work better if the oscillators use different waveforms?
Does the Osc detune slider work when the oscillators are synced?

poropat

  • Full Member
  • ***
  • Posts: 168
  • Karma: 2
Re: How to use SYNC between the two lines?
« Reply #5 on: May 24, 2009, 10:12:14 pm »
The sync is very interesting when the frequencies of each vco could be much different.
On the original CS, it would be unuseful.
With the CS80V the only way to hear something, is to use the matrix modulation,
modulate the frequency of a vco, and use the sync option.
VCollection 8

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines