help with axiom controller set up for cs80v

[ray]

i have set up proper cc assignments on my axiom keyboard for cs80v.

i can see the proper cc's are working and sending out info using midi monitor

i can also see the midi in signal is working on the cs80v when i touch or move the sliders, but the  sound does not change, and the sliders on the cs80v do not move

the axiom does make the cs80 play sounds, and i can use the pitch and mod wheels

i've restarted all the hardware and software numerous times, all the cables work, and all the software is up to date

any thoughts why the cs80 v sees the midi transmission but is not accepting the transmission?

[bg]

Ray, not sure why this is happening.  How are you making CC assignments on the CS-80V?  Are you using the MIDI learn function? i.e. cmd or ctrl-clicking the on-screen control.  There are a few CC numbers that CS-80V reserves and can't be assigned.  It's unlikely, but possible that you chose them.  The reserved CC's are 0, 1, 32, and 64.  Also, CC assignments are separate for each of the 8 voices in MULTI mode.  For troubleshooting your problem make sure the MULTI hatch is closed.  That's all I can think of right now.

[ray]

the cc assignments are from the enigma (axiom'c mac based librarian) files

where could i find a list of cc's for cs80v?

i tried the website, my printed manual, and the original disc, but not there

here's the list  of cc's i'm using

sliders
94 -volume
105 - mix
106 - brilliance
107 - resonance
108 - touch response, pitch bend
109 - touch response, speed
110 - touch resonse - vco
111 - touch responce vcf
116 - volume

dials
61 - 1 touch init brilliance
62 - 1 touch init level
63 - 1 touch after brilliance
65 - 1 touch after level
90 - 2 touch init brilliance
91 - 2 touch init level
92 - 2 touch after brilliance
93 - 2 touch after level

buttons
123 - all noteds off  (this one works)

[bg]

Again, how are you assigning CC's on the CS-80V itself?  (I'm not asking about the Axiom/Enigma settings.)  The CC list you posted should be fine, provided CS-80V controls are assigned accordingly.

[ray]

i tried assigning them manually on the axiom and saving as a new preset

i also tried in enigma software

i now have it working as i tried using the midi learn feature suggested from the enigma user groups

i'm glad it now works, but i don't understand as the settings were all proper and sending out the correct info but nt being received correctly on the cs80v

_________________________

my next question is how to use the program and bank assignments numerically on my axiom with cs80v?

the patches are set up on the cs80v my name of author, type of patch, and then patch name....

how do i know the corresponding bank and program numbers for these patches?

thanks for your assistance