April 19, 2024, 06:49:36 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Polybrute Cheat Sheet  (Read 6090 times)

dave the butcher

  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Polybrute Cheat Sheet
« on: March 18, 2021, 11:08:17 am »
Hi everyone,
I just made a Cheat Sheet to remember all (non-standard-[settings]) shortcuts. 8) It might be incomplete, but a good starting point for your own cheat sheet. The docx is attached.

If you have additions, please post here.
greets
Dave

Shortcut                                                     Function
   
[Panel left arrow] + [Preset]                     Initialize Patch
Hold LFO [Mode]/[Retrig] for 1 second     LFO Polarity
Hold LFO [Sync]                                     Division Menu
[Panel left arrow] + Master Cutoff             Reset Master Cutoff
[Settings] + Attack/Decay                     Envelope curves
[Settings] + Velo slider                             envelope's velocity modes
[Settings] + Stereo knob:                     Voice pan / Voice + Filter pan
[Settings] + Morphée surface /
Morphée button 1 second.                     Morphée Settings page
[Polyphony] + key,                                      number of voices used by each zone
[Timbrality] + key                                     split point
[Timbrality] + [Octave < / >]                      transpose lower half
Hold [Wheel] button                             Vibrato Options
[Settings] + Morphée surface /
Morphée button 1 second.                       Morph response
[Save] once                                              Snapshot
[Settings] + [Save]                                        recall a Snapshot
[Save] three times                                         save to current location
[Save] + [Assign 1-8] (optional) +Press Matrix A1-L8   Save preset to other location
[Panel left arrow] + Amount Knob                Reset Mod Level to 0
[Panel left arrow] + Mods button.               clear the Modulation Matrix,
[Panel left arrow] + Assign Button                Delete Mod Destination
Sequencer   
[Metro] for 1 second.                                count-in feature
[Tap] button in rec mode playing               erase notes
Hold [Sequencer]                                       Sequence editing features
[Seq] + Rate                                                Tempo in 0.1 Increments
[Stop] 3 times                                                  All Notes Off Command

mcresp

  • Apprentice
  • *
  • Posts: 12
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #1 on: March 24, 2021, 12:45:43 pm »
thank you  :)

dave the butcher

  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #2 on: March 24, 2021, 06:47:09 pm »
 :)

mcresp

  • Apprentice
  • *
  • Posts: 12
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #3 on: March 25, 2021, 12:26:44 am »
The best one - hold presets and turn any knob or slider and it will show you where the value for it is set. 

dave the butcher

  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #4 on: March 25, 2021, 08:39:17 am »
Cool, thx

Synthbert

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #5 on: April 05, 2021, 12:03:01 am »
The best one - hold presets and turn any knob or slider and it will show you where the value for it is set.

wow. thank you. but do you know why always the A & B parameters are changed simultanously?

Moho

  • Apprentice
  • Jr. Member
  • *
  • Posts: 60
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #6 on: April 05, 2021, 11:10:50 am »
The best one - hold presets and turn any knob or slider and it will show you where the value for it is set.

wow. thank you. but do you know why always the A & B parameters are changed simultanously?

It just displays A and B values, no changes made.

WytchCrypt

  • Newbie
  • Apprentice
  • *
  • Posts: 49
  • Karma: 2
Re: Polybrute Cheat Sheet
« Reply #7 on: December 25, 2021, 01:02:35 am »
Hi all,

With the new firmware version 2 I thought I'd revisit this thread and update the original list from "dave the butcher".  My list only deals with voice programming related shortcuts.  Here's the raw version of the data and I've attached a *.doc version for anyone who'd like to d'load and make their own additions.  It would be great if people could post any shortcuts they know of that aren't already on both Dave's original list and my updated one!

Thanks  ;)

Code: [Select]
Shortcut Function
[Panel left arrow] + [Preset] Initialize Patch
[Panel left arrow] + Master Cutoff Reset Master Cutoff
[Panel left arrow] + Amount Knob Reset Mod Level to 0
[Panel left arrow] + Mods button. clear the Modulation Matrix,
[Panel left arrow] + Assign Button Delete Mod Destination
[Settings] + Morphée Controller Morphée Settings: Tap/Hold/Scan/HoldScan
[Settings] + Morph Knob Morph Pitch Quantize: Continuous/Chromatic/Intervals
[Settings] + VCF/VCA/MOD Attack/Decay Set Attack: Default/Quick & Decay: Default/Percussive
[Settings] + VCF/VCA Velo slider Env Mode: Amt/Net/Short/Extend/Single/x2/x3/Loop
[Settings] + Mod Env Delay Env Loop Mode: Single/x2/x3/Loop
[Settings] + Stereo knob: Voice pan /Voice + Filter pan, Distribution: Centered/Gradual
[Settings] + VCO1 Tune Tune Modulation Intervals
[Settings] + VCO2 Tune Tune Knob & Modulation Intervals
[Settings] + VCO1 Metalizer Mode: Triangle or ALL waves
[Settings] + VCO2 Sub Sub Level Crossfade or Level
[Settings] + LFO3 Curve Rise: Standard/Inverted
[Settings] + Fine Tune Analog Accuracy Pitch/Others: Off/Mild/Medium/Wild
[Settings] + Modulation Intensity EQ Presets: Bypass/7 Other Presets
[Settings] + Delay Time Time Modes: Hz/Sync-Bi/Sync-Tri/Sync-Dotted
[Settings] + Delay Type Delay 7 Additional Presets
[Settings] + Delay Regeneration Delay Filters: 4 HP & 4 LP choices
[Settings] + Reverb Damping Reverb HP Filters: Bypass/Lo/Mid/Hi Cutoffs
[HOLD] Morphée Button Morphée Settings: Tap/Hold/Scan/HoldScan
[HOLD] Wheel Button Vibrato Options: Range & Source
[HOLD] LFO1/LFO2 Mode Global Retrig: Mono:On/Off, Polarity:Unipolar/Bipolar
[HOLD] LFO3 Retrig LFO3 Polarity:  Unipolar/Bipolar
[HOLD] LFO1/LFO2/LFO3 [Sync] Divisions: Binary/Triplet/Dotted
[HOLD] Polyphony Button [Uni/Mono] Uni/Mono Allocation: Priority/Legato
[HOLD] Polyphony Button [Poly] Poly Allocation: Note & Steal Options
[HOLD] Timbrality Button Polyphonic Allocation (Lower)
[Settings] + [Save] Recall a Snapshot
[Save] three times Save to current location
[Save] + [Assign 1-8] +Press Matrix A1-L8 Save preset to other location


Enarke

  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #8 on: February 06, 2022, 08:43:51 am »
I will be making use of both lists. Thank you!

WytchCrypt

  • Newbie
  • Apprentice
  • *
  • Posts: 49
  • Karma: 2
Re: Polybrute Cheat Sheet
« Reply #9 on: February 07, 2022, 02:24:53 am »
 ;)

21hertz

  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Polybrute Cheat Sheet
« Reply #10 on: May 06, 2022, 07:33:30 pm »
Nice!

I have one issue though: "Seq + Rate" for internal tempo doesn't seem to work (v2.0). I have set it to Internal Clock.
Setting the tempo inside Polybrute Connect VST works though.

StudioDeutz

  • Jr. Member
  • **
  • Posts: 78
  • Karma: 3
Re: Polybrute Cheat Sheet
« Reply #11 on: January 08, 2023, 06:12:27 pm »
Dear all - I have added some additional shortcuts....
This includes Debug Mode, where "holding Polyphony" in Debug Mode displays information to each Note and its individual Source, Upper/Lower, Velocity Strength.
Good for analysing Note Steal issues, or quirky voices in some settings (sometimes single voices are overreacting with the Brute Factor - one cannot really do anything against it, but at least knows....)
« Last Edit: January 12, 2023, 05:06:59 pm by StudioDeutz »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines