November 22, 2024, 12:09:17 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Killed the Brute with SysEx Firmware update  (Read 4494 times)

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Killed the Brute with SysEx Firmware update
« on: January 18, 2017, 09:28:15 am »
I thought it was ok to reboot ... I had previously sent the SE's firmware to my regular microbrute and I've been having issues with the audio output. (Both headphones and Main Out).

I only get an audible signal from the Notch Filter.

So I figured ... I'll send the regular firmware back to the brute ... i guess i thought it was done and rebooted the power on it and now ... it's completely dead.

If anyone knows a fix, that would be awesome. Major facepalm here. :(

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: Killed the Brute with SysEx Firmware update
« Reply #1 on: January 18, 2017, 09:45:14 am »
is it a mini or a micro?
Bruno
Arturia Hardware

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Killed the Brute with SysEx Firmware update
« Reply #2 on: January 18, 2017, 09:48:40 am »
It's a mini and I tried booting it up by holding down the two octave buttons. the software still doesn't see it. :(

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: Killed the Brute with SysEx Firmware update
« Reply #3 on: January 18, 2017, 09:55:05 am »
You can try the octave buttons procedure but with Connection software version 1.0.2

https://www.arturia.com/minibrute/resources


if it still doesn't work check if you computer can see, for example on windows, in the device manager panel
Bruno
Arturia Hardware

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Killed the Brute with SysEx Firmware update
« Reply #4 on: January 18, 2017, 10:11:22 am »
Thank you! that worked :) much much thanks

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: Killed the Brute with SysEx Firmware update
« Reply #5 on: January 18, 2017, 10:13:24 am »
once fixed with 1.0.2 you should be able to update to 1.0.3 again
Bruno
Arturia Hardware

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Killed the Brute with SysEx Firmware update
« Reply #6 on: January 18, 2017, 10:19:23 am »
Ok, any idea as to why the synth only works in notch mode?

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: Killed the Brute with SysEx Firmware update
« Reply #7 on: January 18, 2017, 11:01:24 am »
do you have a low pass in notch position ?
if so I think the filetr rotary selector has one of it's two contacts broken or oxidized.
Bruno
Arturia Hardware

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Killed the Brute with SysEx Firmware update
« Reply #8 on: January 18, 2017, 11:47:18 am »
I have the filter selection switch/knob in the notch position. All the other filter types do not work.

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: Killed the Brute with SysEx Firmware update
« Reply #9 on: January 18, 2017, 02:32:07 pm »
ok but does the filter work like LP when you are in notch position, or is it the normal notch?
Bruno
Arturia Hardware

BodoBrute

  • Jr. Member
  • **
  • Posts: 60
  • Karma: 4
Re: Killed the Brute with SysEx Firmware update
« Reply #10 on: January 18, 2017, 02:34:33 pm »
I have the filter selection switch/knob in the notch position. All the other filter types do not work.

That sounds very suspiciously like the known faulty filter mode knob problem. Mine is definitely affected - it is currently bypassed and firmly soldered to lowpass. I'll have to replace the switch when I find the time to do so...

These switches do sometimes break (here's some info about one of the arpeggiator/sequencer knobs, including pictures).

Solution: Have the switch replaced.

pulsewidthmod

  • Apprentice
  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Killed the Brute with SysEx Firmware update
« Reply #11 on: January 18, 2017, 02:43:37 pm »
ahhhh, great ... yes, it does sound like it's just low pass. this sucks

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines