June 18, 2024, 09:41:05 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Adjusting Velocity Sensitivity?  (Read 3886 times)

calvinsomething

  • Apprentice
  • Apprentice
  • *
  • Posts: 12
  • Karma: 0
Adjusting Velocity Sensitivity?
« on: October 27, 2015, 09:31:52 pm »
Is there a way to adjust the sensitivity of the pad's velocity readings? I find it very difficult to record/play low velocity notes... I have to barely touch the corner of the square, making the velo->filter cutoff not nearly as useful as it could be.

Thanks if anybody can answer this!

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Adjusting Velocity Sensitivity?
« Reply #1 on: October 27, 2015, 10:47:19 pm »
Hi there is a way to do this but I'm not sure if you have access to it .
If you open the mcc  on the top bar where it says view there is a drop down with dianosis  if its greyed out you can't use it .

Ill ask  the team if you can get access to this but in there you can calibrate the pads  but you need the correct weight to do this.

let me know

Terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Steinberger

  • Jr. Member
  • **
  • Posts: 61
  • Karma: 2
Re: Adjusting Velocity Sensitivity?
« Reply #2 on: October 27, 2015, 11:17:38 pm »
A setting in MMC for various sensitivity curves would be a nice to have. Trigger Finger Pro has this.

Soul_Processor

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Adjusting Velocity Sensitivity?
« Reply #3 on: October 29, 2015, 02:11:44 pm »
I agree, being able to adjust the sensitivity would be great

Guy Brush

  • Apprentice
  • Apprentice
  • *
  • Posts: 14
  • Karma: 1
Re: Adjusting Velocity Sensitivity?
« Reply #4 on: February 04, 2016, 12:09:37 am »
I second that.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines