Firmware 1.2.0.6 is out!

[Terrym]

Hi , The latest firmware is out 1.2.0.6
http://www.arturia.com/beatstep-pro/resources

Terrym

[Zymos]

I've been using several of these "new features" since getting the BSP several weeks ago.
------------------------
New features
Looper, Roller fully functional

Enter note with pad/external midi note by holding a step button

Directly select drum by pressing a pad

Sequence Transpose by pressing Sequencer button and a pad

Pressing pad in Sequencer mode send Midi Notes
Load/Sync sequences and settings with MIDI Control Center >= 1.2.0
-----------------------



    Glad you are fixing bugs- what about the main defect in the BSP (in my opinion of course)- not finishing the current sequence when switching to another one. Is that going to be addressed? It's a huge shortcoming.

[turbo_kev]

Hi

Most of them so called NEW features were already in the previous version ?

And when my Daw clock is set to 120bpm  the BSP still does not display the correct tempo
it jumps about all over the place. So that has not been fixed. SO NO HUGE IMPROVMENT HERE

And when I startup the BSP   the displays DO NOT SHOW THE FIRMWEAR REVISION

So for me this was NOT a upgrade per say. But mainly bug fixes for those that use  cv and gate

Come on Arturia pull your finger out and stop with the lies

cheers
kev

what about the main defect in the BSP (in my opinion of course)- not finishing the current sequence when switching to another one. Is that going to be addressed? It's a huge shortcoming.

and also copy seq1 to seq 2   ?  whats happened to that chestnut?

the two main updates people were asking for and nothing ??

 

[ZRK]

Are you serious?

[turbo_kev]

Is who Serious

[Terrym]

Hi kev, the firmware is shown in the sequencer displays going down  1
                                                                                                       2
                                                                                                       0
                                                                                                       6      on start up
Also the tempo  drift  is normal for midi clock but arturia have improved this not to affect sync drift.

seq to change at the end of a pattern will be coming

copy pattern from s1 to s2  will also come

Terrym

[Zymos]

Coming when?


Copy sequence is even in the manual, which must have been written a couple of months ago.

[turbo_kev]

Good Evening    MR T

thanks for the info on the firmware display

I await the new features with baited breath

But why did Arturia Make a splash about NEW FEATURES
when 99% of them were already included

it makes them look complete idiots

Rant over
i'm of to take a chill pill

goodnight from sunny Spain

[sequentialx]

I'm playing a gig on friday, should I wait to upgrade or is this version stable?

I'm interested in the upgrade because I've had a few bugs while practicing.

Once the unit just stopped sending MIDI through, also the roller sometimes mutes a pad in control mode.

[Terrym]

I'm playing a gig on friday, should I wait to upgrade or is this version stable?

I'm interested in the upgrade because I've had a few bugs while practicing.

Once the unit just stopped sending MIDI through, also the roller sometimes mutes a pad in control mode.

This is a stable version on my mac no problem and there are loads of fixes even i was glade this update came as the last one was really buggy

[Terrym]

Good Evening    MR T

thanks for the info on the firmware display

I await the new features with baited breath

But why did Arturia Make a splash about NEW FEATURES
when 99% of them were already included

it makes them look complete idiots

This was an error kev and has been removed .  there was meant to be another new feature but it still needs some work.

[Filterseducer]

once again, afraid to install update and crash the few main features working fine on my BsP. Will wait for users feedback and see... arturia, is hard to believe you (like Volkswagen)

[Hastur]

I think the "NEW FEATURES" that were at the bottom of the release notes were from the previous update, and they forgot to delete them (they're gone right now).

And what about the switching of the pattern at the end of the current pattern ? I read on this forum that this function was already -implemented in some beta firmware prior to the release of the BSP. If this function is already coded, seeing the number of people asking for it, why wasn't it included in this update ? I, for one, won't buy the BSP if this is not implemented in a timely manner, in spite of that I'd like to support a company from my native country. So, when is the next firmware scheduled ?

[Steinberger]

With this new release the PC version of MCC the sync button and function is not available. You can still recall from and store to but the live sync to the device is now broken. You can tell when you launch MCC the sync button appears for only a moment before disappearing. MIDI console shows no comms going to or from the BSP.

[Zymos]

From the release notes:

Improvements:
BeatStep Pro Sync function was replaced by drag and drop between device memories and local templates.
Drag and drop Controller Map, Sequences, Drum Sequences separately from local templates to BeatStep Pro.
Set drum map range to [0,127] for BeatStep Pro
New features from KeyLab 88 version 1.1 are accessible
Bug Fixes:
BeatStep Pro Sequencer 1 Gate type and Sequencer 2 CV type were inverted