June 22, 2024, 08:17:46 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: MiniFuse 4: Phantom power on TRS input?  (Read 1274 times)

Archibalgul

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
MiniFuse 4: Phantom power on TRS input?
« on: November 08, 2022, 07:38:57 pm »
Is there ever phantom power on the TRS part of the XLR/TRS combo jacks on the front? My guess is: No, only on the XLR inputs (and only if it switched on, of course). IIRC, phantom power could cause funny things while plugging in/out a TRS plug or using a TS plug then.

I just want to make sure that I don't accidentally fry my equipment when plugging it in via an (unbalanced) TS cable on the front of the MiniFuse 4. I couldn't find details about this in the manual.

Matthieu_Arturia

  • Administrator
  • Full Member
  • *****
  • Posts: 170
  • Karma: 10810
Re: MiniFuse 4: Phantom power on TRS input?
« Reply #1 on: November 29, 2022, 11:52:26 am »
Hello Archibalgul

Yes you are right phantom power is only available when using XLR cables, not with jacks (TS or TRS).

" IIRC, phantom power could cause funny things while plugging in/out a TRS plug or using a TS plug then."

When Phantom power is on : NEVER, and i insist, NEVER EVER disconnect any cables.
You must first turn off the +48 V , using XLR or not, doing this is the way to ensure you won't fry anything.
Cheers.
QA Technician

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines