February 21, 2024, 02:20:20 am
Welcome, Guest. Please login or register

Arturia Forums

Author Topic: Keystep: dead key - Solution!  (Read 2263 times)


  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.176
  • Karma: 67
Keystep: dead key - Solution!
« on: August 09, 2021, 08:47:37 am »
Not sure if anyone other than me has had an issue with one or more keys dying on their Keystep. By 'dying' I mean either not working at all or only working when you punch it with the force of a thousand suns. I had two 'dead' keys: the second F and and the last B. Sometimes they would work depending on how hard I hit them, but mostly they were mute.

Obviously if your machine is within warranty, exercise your right to have it repaired under warranty, but because this occurs as a result of dirt/dust build-up over time, likely it will be out of warranty.

The TL;DR answer is to disassemble the machine to gain access to the circuitboard under the keybed, clean the contacts on the circuitboard with IPA / rubbing alcohol, then reassemble it. The whole procedure can be undertaken in half an hour, including reassembly time. The only things you need are one small Phillips screwdriver, IPA, a few cotton buds (Q-tips as Americans call them), and a large enough workspace.

I might do a step-by-step video and upload to YT, but in the meantime, if you're having this issue, then unless you have the dexterity of a drunken elephant (which surely you can't have, if you can play a keystep), definitely give it a go. Just don't mix up the internal / external screws, they're different sizes.
« Last Edit: August 10, 2021, 11:30:11 am by MajorFubar »
2022 Apple Studio Max 32/32/2TB Monterey V Collection 9 Analog Lab 4 + 5 KeyLab 88 KeyStep


Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines