November 26, 2024, 07:06:04 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Mix output static noise  (Read 5215 times)

leaveatrail

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Mix output static noise
« on: March 25, 2017, 02:48:21 am »
Hi,

Mix output on my DB has constant audible static hiss, which gets closer to white noise sound when I crank up the master volume. Headphones output has some hiss to, but it's lot less audible and doesn't change it's tone with when cranked. Does anyone else has noticed something like this?

Cheers!

leaveatrail

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Mix output static noise
« Reply #1 on: March 26, 2017, 05:04:22 pm »
I've recorded a small example: DB mix output is connected to apogee duet via short guitar cable. I'm twisting the master level knob and increasing instrument input volume on apogee, so it get's really loud in second half of recording. https://soundcloud.com/mykhailo-purish/drumbrute-mix-output-noise

0rgazm0

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Mix output static noise
« Reply #2 on: April 02, 2017, 07:21:34 am »
I just got a drumbrute today and think I have something similar. Not really the white noise but the other noise. Sounds like a ground issue or something always going. I have compared it to my Rhythm Wolf and the Wolf has no noise using same outlet/cable. Get same noise out of all individual outputs and mix/headphones. Only had outputs and power, no USB or anything else connected.


0rgazm0

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Mix output static noise
« Reply #3 on: April 03, 2017, 02:58:47 am »
Tested more today  mine is just the same. White noise comes in around 60% master volume knob and gets pretty loud.

Edouard_Arturia

  • Product Manager
  • Administrator
  • Sr. Member
  • *****
  • Posts: 427
  • Karma: 51
Re: Mix output static noise
« Reply #4 on: April 05, 2017, 04:46:54 pm »
Hello.

Here we can distinguish two type of noise in your recording.

One looks like white noise.

The second looks like a ground loop noise. (Check ground loops on Google)

Does the noise appear with the USB plugged ?

Looking forward to hearing from you

Musically Yours

Edouard
DGDGDGDGDG

0rgazm0

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Mix output static noise
« Reply #5 on: April 05, 2017, 05:02:24 pm »
Yes, it gets white noise when the master goes above 50-60%.

I do not think this is a ground issue as I have tested other drum machines and synths on the same outlet that do not get either noise when fully cranked.


I do not have the USB plugged in. only power and outputs.
« Last Edit: April 05, 2017, 05:14:06 pm by 0rgazm0 »

leaveatrail

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Mix output static noise
« Reply #6 on: April 07, 2017, 01:35:38 am »
I think I've figured out what was my problem - I was running DB into instrument preamp of my audio interface, which is amplifying line-level signal too much bringing up the noise. When I bypass the preamp and run DB on +4 dbu or -10 dbu there's no issue with noise.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines