November 24, 2024, 12:39:14 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: PRST LINK issue  (Read 1753 times)

Gabpipes

  • Apprentice
  • Apprentice
  • *
  • Posts: 18
  • Karma: 1
PRST LINK issue
« on: June 07, 2016, 08:14:51 pm »
Ciao!! This my first time in this forum. I'm Italian and my English is not good, I try to explain the issue with my BSP.
In the same project: PATTERN 1, the sequence starts with D1, D2, D3,...; PATTERN 2, the sequence starts with D2, D3, D4,...; PATTERN 3, the sequence starts with D3, D4, D5,... In short, the same sequence in different octaves just to transpose it with one finger, with the help of PRST LINK button. But..., when I change pattern from 1 to 2, the first note of pattern 2 is D1 and not D2. The same from pattern 2 to 3, the first note of pattern 3 is D2 and not D3. The same problem going back from pattern 3 to 2, the sequence 2 begins with D3. The same issue from pattern 2 to 1 or from 3 to 1. The problem is in the first note, the rest of the sequence changes correctly.
Any solution for this problem?
Thank you, ciao!
Gab

Valentin Arturia

  • Administrator
  • Full Member
  • *****
  • Posts: 149
  • Karma: 28
Re: PRST LINK issue
« Reply #1 on: June 08, 2016, 01:54:15 pm »
Hi,
it's seems you're not running the latest firmware. Try to update it with the MCC. You'll find everything you need here :
https://www.arturia.com/beatstep-pro/resources
The current firmware version is 1.4.0.20.


Gabpipes

  • Apprentice
  • Apprentice
  • *
  • Posts: 18
  • Karma: 1
Re: PRST LINK issue
« Reply #2 on: June 08, 2016, 03:01:56 pm »
Thanks, I had not seen that there is a new updating. All now works well!! :) :) Ciao!! Gab

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines