Sequence 2 gate out hanging after first note

[granville]

I have Sequence 2 hooked up to my modular via the 3.5mm cv & gate outs. When the BSP is playing the sequence works as expected BUT when the BSP is stopped and I am triggering notes by hitting the pads the gate out only sends the first gate and then hangs. If I press stop I can then get a further note from Sequence 2, but I can only ever get the first gate and then nothing. The pitch CV is responsive, but the gate isn't.

Incidentally if I use the knobs to select a pitch value the gate triggers with each change in pitch as is should. This problem seems to be specific to playing the pads.

FYI Sequence 1 works exactly as it should, this is just a problem with the gate out on Sequencer 2.

Any ideas on what's going wrong?

[kmeyerpdx]

This started happening to me last night too, exactly as described here. Did you ever find a solution?

[rove]

I am also having this issue on a new Beatstep Pro. 

Tried reinstalling the firmware (1.4) and the issue persists, gate stays high from sequencer two gate out when a note is played and only an All Notes Off (triple press on stop button), or playing the sequence resets it.

Bug?

[Edouard_Arturia]

Hello.
Have you guys tried the hard reset procedure ? (Hold PRST LNK + << + >> + LST STEP at power up)
-> You must be on firmware 1.4.0.2
-> Don't forget to save your sequences with the Midi Control Center first.
Let me know if that fixes the issue.
Kindly
Edouard

[rove]

Hi Edouard and thanks for your response.

The hard reset procedure, followed by reinstalling FW 1.4.0.2 has got sequencer 2 back on track for me, the gate is not sticking any more.

I appreciate the response, hopefully this fix works for others as well.