Author Topic: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out (Read 1917 times)

maddyman · « **on:** June 08, 2018, 08:44:46 pm »

Hi everybody, everytime I start Logic X I get the message:
In order for the Spark controller to work correctly with Spark used plug-in mode. it is necessary to turn off some MIDI connections in your DAW MIDI settings.
Can anyone tell me which and how I should turn off the necessary Midi connections?
I didn't find any details in the user's manual and the plug in seems to be unstable all the time.
Thank you for any advise

youwokeup · « **Reply #1 on:** July 10, 2018, 06:15:39 am »

I hope They are listening.

I am currently searching for the answer as well. The font in the "warning" seems to be from the Spark device as Cubase has a different layout.

Any help is really appriciated.

Terrym · « **Reply #2 on:** July 12, 2018, 07:24:09 pm »

Hi did you try this
https://www.arturia.com/legacy/downloads/support/howto/pdf/Spark/tuto_spark_1.7.1_logic_X.pdf

artao · « **Reply #3 on:** September 01, 2018, 06:30:38 am »

Basically, turn off ALL MIDI connections to Spark in your DAW.
Spark takes care of that all by itself, and gets confused if you DON'T do that.

Author Topic: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out (Read 1917 times)

maddyman

Spark Creative Drum Machine-Hardware devise- problem with Midi in and out

youwokeup

Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out

Terrym

Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out

artao

Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out