November 01, 2024, 08:54:42 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Sequence 2 gate out hanging after first note  (Read 1875 times)

granville

  • Apprentice
  • Apprentice
  • *
  • Posts: 10
  • Karma: 0
Sequence 2 gate out hanging after first note
« on: July 24, 2015, 08:38:13 pm »
I have Sequence 2 hooked up to my modular via the 3.5mm cv & gate outs. When the BSP is playing the sequence works as expected BUT when the BSP is stopped and I am triggering notes by hitting the pads the gate out only sends the first gate and then hangs. If I press stop I can then get a further note from Sequence 2, but I can only ever get the first gate and then nothing. The pitch CV is responsive, but the gate isn't.

Incidentally if I use the knobs to select a pitch value the gate triggers with each change in pitch as is should. This problem seems to be specific to playing the pads.

FYI Sequence 1 works exactly as it should, this is just a problem with the gate out on Sequencer 2.

Any ideas on what's going wrong?


kmeyerpdx

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Sequence 2 gate out hanging after first note
« Reply #1 on: February 19, 2016, 08:47:42 pm »
This started happening to me last night too, exactly as described here. Did you ever find a solution?

rove

  • Apprentice
  • Apprentice
  • *
  • Posts: 31
  • Karma: 1
Re: Sequence 2 gate out hanging after first note
« Reply #2 on: April 18, 2016, 08:40:00 pm »
I am also having this issue on a new Beatstep Pro. 

Tried reinstalling the firmware (1.4) and the issue persists, gate stays high from sequencer two gate out when a note is played and only an All Notes Off (triple press on stop button), or playing the sequence resets it.

Bug?

Edouard_Arturia

  • Product Manager
  • Administrator
  • Sr. Member
  • *****
  • Posts: 427
  • Karma: 51
Re: Sequence 2 gate out hanging after first note
« Reply #3 on: April 19, 2016, 09:35:47 am »
Hello.
Have you guys tried the hard reset procedure ? (Hold PRST LNK + << + >> + LST STEP at power up)
-> You must be on firmware 1.4.0.2
-> Don't forget to save your sequences with the Midi Control Center first.
Let me know if that fixes the issue.
Kindly
Edouard
DGDGDGDGDG

rove

  • Apprentice
  • Apprentice
  • *
  • Posts: 31
  • Karma: 1
Re: Sequence 2 gate out hanging after first note
« Reply #4 on: April 20, 2016, 05:48:44 pm »
Hi Edouard and thanks for your response.

The hard reset procedure, followed by reinstalling FW 1.4.0.2 has got sequencer 2 back on track for me, the gate is not sticking any more.

I appreciate the response, hopefully this fix works for others as well.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines