LFO Amount knob don't work.

[zigge]

The amount knob in the LFO section has stopped working. It has no effekt to the hard wired pitch nor any output level in the mod matrix. The mod wheel is set to Cutoff. Updating the software don't solve it. I believe the LFO is digital? Is there a soft reset I can try?

[Bruno@arturia]

the LFO amount knob is analog.
Du could be due to the matrix jack, being stuck in open position. either a bad contact, either faulty. You can try to insert a jack into it few times. if it does not solve your issue, please post a picture of your front panel settings, so that I can double check it.

[zigge]

Sorry, it still doesn't work. Not with cable either..

EDIT: Seems I can't upload the photo. I select it from my HD under attachments and then press [save] 

Settings:
Overtone: 0
Saw: 12 o'clock
Pulse: 0
Triangle: 0
All OSC shape: 0
Cutoff: 3 o'clock
Resonanse: 0
Brute: 0
Filter mode: LP
Env amount: 0
KB Track: 100%
Master Vol: Max
Glide: 0
Mod wheel: Cutoff
LFO Amount: 12 o'clock
LFO wave: Tri
LFO Rate: 12 o'clock
LFO Sync: Free
Env Amount: 0
VCA: Gate
Envelope: All 0
Pattern play: off
Pitch and mod wheel: Center position
No Cables in the mod matrix nor CV/Gate I/O.....

[Bruno@arturia]

sounds like a faulty pot, or solder joint. You should ask your retailer for a replacement unit