November 14, 2024, 05:12:19 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: did I break the hold keys function on two different keysteps in two days?  (Read 1180 times)

charonme

  • Apprentice
  • Apprentice
  • *
  • Posts: 14
  • Karma: 0
the "hold keys" function of the hold button (my favorite function of the keystep) stopped working after I powered the keystep using a usb cable instead of the usual 9v adapter (the usb cable moved slightly and the power was disconnected - perhaps a faulty usb connector). All other functions seem to work, including the hold button holding in arp mode and sending a sustain midi msg using the hold button, but it no longer holds notes when the arp/seq is stopped. I tried updating the firmware, trying different hold button settings in the MCC etc.

And the next day the same thing happened to another keystep

megamarkd

  • Hero Member
  • *****
  • Posts: 835
  • Karma: 38
  • Dead By Dawn
Weird, did it happen to both when powering via USB?
Try using the 9v power and doing a factory reset by pressing the octave up and down buttons while powering on.  Back up your patterns first in MCC, of course.
Currently running https://www.modulargrid.net/e/racks/view/1311723 / www.modulargrid.net, sequencing with KSP and recording with a Zoom (no DAW involved, for better or worse ;) )

charonme

  • Apprentice
  • Apprentice
  • *
  • Posts: 14
  • Karma: 0
thanks, I already tried that, didn't help

I also tried downgrading the firmware to two old versions I found and then upgrading it back to the newest one
« Last Edit: August 24, 2020, 03:24:08 pm by charonme »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines