Arturia Forums

Software Instruments => DX7 V => DX7 V - Technical Issues => Topic started by: lfosc1by4 on April 21, 2019, 10:02:42 pm

Title: DX7 MOD - OP PAN ISSUE
Post by: lfosc1by4 on April 21, 2019, 10:02:42 pm

Wondering why my PAN is deactivated in the mod matrix? :/

(https://ibb.co/MZtnTxd)

Title: Re: DX7 MOD - OP PAN ISSUE
Post by: LBH on April 22, 2019, 12:19:40 am

Hi and welcome to Arturia forums.

A operator Pan is deactivated when the selected operator is'nt linked directly to the output in the selected Algorithm.  That mean all operator Pan's only are availble for Algoritm number 32.

I can suggest you read the manuals sections:
6.5.4. Pan
Use this parameter to set the stereo position of the operators. The Pan knob is only available
when one of the carriers is selected.

6.3.1. Disabling an oscillator - That include this info: The pan position of a carrier with a disabled oscillator will also be applied to the modulators.

Hope that's it.

Title: Re: DX7 MOD - OP PAN ISSUE
Post by: lfosc1by4 on April 23, 2019, 10:30:36 am

Thanks for the welcome :)

I had similar suspicions, thank you for pointing it out.