Arturia Forums

Hardware Sequencers => BeatStep => Topic started by: f10 on October 06, 2017, 06:25:46 pm

Title: select beyond 16 banks
Post by: f10 on October 06, 2017, 06:25:46 pm

Hi Everyone,

need some help for a pretty simple thing that I can't work out even after doing some research on the subject - -

My setup is as such : beatstep link via midi to the Eventide Pitchfactor. I'm using the beatstep to select my banks on the pedal with the mode 'patch Change'.
It's working fine to select the first 16 banks on the pedal.

The problem is, I have new settings saved in my banks on the Pitchfactor after the first 16th and can't get the beatstep to go above 16 - I tried different settings with MCC.
I was guessing that changing from channel 1 to 2 would help but the 'program number' stays the same even if the channel does change.

So I'm looking to be able to select my first 16 bank on channel 1 than switch to channel 2 and select 16 other banks.

Does that make sense to any of you?

Thanks for your help, I'm sure I'm missing something pretty obvious.

Cheers

Title: Re: select beyond 16 banks
Post by: Misayakagr on November 07, 2017, 11:42:24 am

This is so wonderful that I found it.