Arturia Forums

Hardware Instruments => MatrixBrute => MatrixBrute - Technical Issues => Topic started by: Mick Rowe on July 18, 2017, 01:09:18 pm

Title: Im new to matrixbrute
Post by: Mick Rowe on July 18, 2017, 01:09:18 pm

Hi I just bought a matrix brute and can't seem to activate both the Seq and Arp buttons to enter the matrix arpeggiator . Only 1 button will activate . Do I have something switched on I shouldn't . Can't seem to find much mel pin manual

Title: Re: Im new to matrixbrute
Post by: Matt Arturia on July 18, 2017, 01:30:10 pm

Hi Mick,

To activate the Matrix Arpeggiator you have to press both Seq and Arp buttons at the same time.  If this is not working, are you sure that your unit is on the latest firmware available (1.1.0.73) ? You'll need the Midi Control Center to check the firmware revision of your unit.

Regards,

Matthieu

Title: Re: Im new to matrixbrute
Post by: Mick Rowe on July 19, 2017, 04:52:28 am

Hi Mathew
I'll check the firmware version . Appreciate your help. :)

Title: Re: Im new to matrixbrute
Post by: Matt Arturia on July 19, 2017, 05:45:34 pm

This feature was only implemented in the latest version of the MatrixBrute's firmware. If your unit is on a firmware < to 1.1.0.73 it's normal that you do not have access to the Matrix Arpggiator. Once you've update your unit, everything should be fine.

Title: Re: Im new to matrixbrute
Post by: Mick Rowe on July 22, 2017, 09:08:39 am

All Fixed - Cheers Matt!!