Arturia Forums
Hardware Sequencers => KeyStep => Keystep Technical questions => Topic started by: mawe3000 on July 08, 2016, 12:15:23 pm
-
When switching from Seq to Arp in paused mode, then pressing Restart and pressing some keys, nothing happens for a few seconds before the arp works as it should. Sometimes, my Minitaur that I control via MIDI seemed to be reset during the idle time (or at least lots of parameters like Waveform, Glide etc. were changed by the KeyStep).
-
Hi mawe3000,
Hum you're right we missed this one.
We will try to fix this one in the next update.
Meanwhile when you switch from seq to arp press stop before launching arp.
thanks for your report and sorry for this bug.
Ben
-
BEN ARTURIA,
.
It may the same or related bug but when in ARP MODE, in a vain attempt to transpose the ARP, press SHIFT and OCT-(Transpose) plus a keyboard note - the KEYSTEP freezes and is unable to play any notes until USB power is unplugged and re-plugged.
...
-
Hi Hawkwind,
Hum, i'm unable to reproduce this one...
Are you able to reproduce that each time ?
Are you running the KeyStep on internal clock or is it slaved ?
Thanks
Ben
-
...
Thanks, Ben, yes running on INTERNAL KEYSTEP CLOCK to Roland Boutique JP-08 or Korg Volca FM.
.
I'll try some further tests...
...
-
When switching from Seq to Arp in paused mode, then pressing Restart and pressing some keys, nothing happens for a few seconds before the arp works as it should. Sometimes, my Minitaur that I control via MIDI seemed to be reset during the idle time (or at least lots of parameters like Waveform, Glide etc. were changed by the KeyStep).
This happens too when just pausing the Arp (hold mode), playing some notes and then restarting it. The gate is running but the CV goes down to zero for quite a few beats. Delayed reaction on key presses before it is working again...