Arturia Forums

Hardware Sequencers => BeatStep => BeatStep - Technical Questions - FAQ => Topic started by: ryanpg on August 12, 2015, 10:39:50 pm

Title: Request pin assignments for 1/8" to 5 PIN DIN MIDI adapter
Post by: ryanpg on August 12, 2015, 10:39:50 pm

Hi all!

Missing the original beatstep 1/8" to 5 pin MIDI adapter. Seems simple enough to wire up a new one, but I can't find any documentation on what pins on the 5 pin female DIN go to the sleeve and tip of the 1/8" male.

My assumption is that sleeve is to pin 2 (ground) and tip is to pin 4 - but I don't want to risk damage so could someone either:

1) use a multimeter to determine what pin(s) go to sleeve and what pin(s) go to tip?

2) ask an arturia rep provide the same info or verify the attached is correct.

Thank you very much in advance!

Ry

Title: Re: Request pin assignments for 1/8" to 5 PIN DIN MIDI adapter
Post by: Djed on May 29, 2019, 07:16:48 pm

Hi I show in detail how to build a replacement adapter in my video

https://youtu.be/QQSugQfFl_w

Hope this helps someone eventually