Arturia Forums
Hardware Sequencers => BeatStep Pro => Beatstep Pro - General Discussions => Topic started by: rezozvuk on May 08, 2015, 04:48:42 am
-
Hi.
I am wondering whether this device works correctly with the standard CV/GATE out using for Korg MS10,
if I am not mistaken it beatstep pro CV/GATE out = V/Oct
while the old Korg MS10 uses CV/GATE in = Hz/V
thank you!
-
it should work with the addition of the sq1 from korg which has both hz/v and V/oct. i am not sure if it act as a converter but is also has midi.
regards dog01
-
Unfortunately SQ10 no MIDI in. I want to manage my MS10 using BEATSTEP.
May have other options ih make friends?
-
You can use CV out from the Beatstep to the "VCO Freq" jack on the MS-10 and turn up the "Frequency Modulation EG/EXT" knob to about 3/4. You need to figure out the exact amount needed for your synth. That knob is not very precise, but if you're lucky you can get it to track ok.
For the trig you need to reverse the gate signal from the Beatstep, because the older Korg uses S-trig. You can buy a converter cable or build it yourself (http://www.doepfer.de/faq/gen_faq.htm#S-Trig (http://www.doepfer.de/faq/gen_faq.htm#S-Trig))
Good luck!
-
BeatStepPro will handle
- S-trigg and V-trigg
- Volts/octave and Htz/Volts
So no problems !
-
Thank you for your response
I want to clarify,
Beatstep processes is whether it will be implemented in the future with?
-
Sorry but i don't understand your question ?
-
I'm wondering the same but with the minibrute ?!?! what can beastep do to this vca input ?
-
BeatStepPro will handle
- S-trigg and V-trigg
- Volts/octave and Htz/Volts
So no problems !
Is that either or or can each track / part be either ?
-
you can set each sequence to either volts or htz on the mcc and save it to the BSP
see screenshot
Terrym
-
Nice .
I'll go ahead and request all these settings to be either hardware controllable or midi cc controllable or both ;)
-
Wow! Nice feature! Dream feature even!
-
Here's a tutorial from Arturia relating to the MS20. Might help.
http://forum.arturia.com/index.php?topic=84889.0
-
Let me add this little tidbit on the SQ-1 just in case you're considering dropping it from consideration. No hardware MIDI Din In on the SQ-1 but you DO have full MIDI I/O over USB. By default CV/Gate-A is on MIDI ch 1 and B is on ch 2. So the SQ-1 does act as a MIDI to CV converter when stopped. I use it this way all the time with keyboard controllers as well as Electribes. Getting USB MIDI into the SQ-1 is as easy as connecting it to a thru box that supports USB clients or hosting it on a powered USB hub on an iConnectMIDI4+ or Audio4+.
Example: If you slave its clock to a BeatStep Pro you now have two more pair of CV/Gate outs and can modulate yourself into a coma state :)
Or just use the sync I/O and go au natural.