Arturia Forums

V Collection - Legacy versions => CS-80V => CS-80V Technical Issues => Topic started by: pmwaring on February 21, 2006, 12:48:28 am

Title: Default "General" Tuning Value
Post by: pmwaring on February 21, 2006, 12:48:28 am

I've been goofing around with the tuning of the CS-80V and I can't remember what the default general tuning value was.

Could some one let me know?

Title: Default "General" Tuning Value
Post by: pmwaring on February 21, 2006, 12:00:09 pm

Would I be correct in thinking that the correct value is 0.9993%?

Title: Default "General" Tuning Value
Post by: bg on February 21, 2006, 02:59:56 pm

Quote from: "pmwaring"

Would I be correct in thinking that the correct value is 0.9993%?

I think it's 0.0000%.  At any rate, there's a "Default Tuning" button to the left of the trimmers.

Title: Default "General" Tuning Value
Post by: pmwaring on February 21, 2006, 03:38:43 pm

Quote from: "bg"

I think it's 0.0000%.  At any rate, there's a "Default Tuning" button to the left of the trimmers.

The "Default Tuning" button only resets the trimmers not the "General Tuning" knob.

The "General Tuning" has values from 0.9700-1.0324.

Title: Default "General" Tuning Value
Post by: bg on February 22, 2006, 02:34:20 pm

Yes, you are right.  Sorry, I didn't realize the Reset button has no affect on the General tuning knob.  I don't know what the default value is supposed to be.

Title: Default "General" Tuning Value
Post by: pmwaring on March 22, 2006, 09:03:54 am

I took a look at the files in the CS-80V directory and found where the global tuning value was stored. I installed the CS-80V demo on my other PC to find the default global tuning value.

Here is to set the global tuning back to its default value.

1. Load the file "C:\Program Files\Arturia\CS-80V\save\controlMidi" into a text editor.

2. Scroll to the bottom of the file.

3. Locate the entry for "TUNE_CS_80_TUNE"

4. Edit the value to be "0.500000" so that the line reads "TUNE_CS_80_TUNE 0.500000"
                                                           
5. Save the file and restart the CS-80V.

Interestingly it would appear that the default value cannot be set using the global tuning knob inside the plugin. If you set the knob to 0.9993% or 0.9992% and check the value in the controlMidi file, then the value is either side of 0.500000 but never 0.500000 exactly.

Paul.

Title: Default "General" Tuning Value
Post by: pmwaring on April 11, 2006, 05:16:05 pm

Arturia eventually answered my tech support question today!!!!

They said the default value is when the global tuning knob is at 1.0000%.

Confused? I am!!!