Arturia Forums
Hardware Sequencers => KeyStep Pro => KeyStep Pro - Technical Issues => Topic started by: ancaja123 on April 12, 2021, 10:57:48 pm
-
I decided to bring out my KSP as it hasn't gotten much use. I notice that for some odd reason, my CV/Gate voices are completely out. Nothing at all coming from them, but the Drum Gates were fine for some reason. So I figured, maybe I turned them off somehow in the MCC. Connected to MCC, nope nothing there to turn them off so it must be one of MANY bugs which really has started to piss me off, but I see theres a firmware update available, and maybe this would get rid of the bugs. Excited, I download and install the firmware update. Mid update my unit turns off completely and a message comes up on the MCC screen stating theres been an "error". Confused, I try to turn my unit on and off again and its completely dead. :'(
Arturia, this is absolutely INSANE. I was extremely excited to buy this product when it was announced and what I received is a $400 paperweight. Never have I had an experience with it where some kind of bug didn't show up. Global transpose was advertised (literally the reason I bought it) and never appeared. I will be speaking with support, but this may be one of the most disappointing and frustrating piece of gear I have ever had, and I've owned tons of vintage synths and samplers throughout my life. >:(
Three words: "W T F"
-
I decided to bring out my KSP as it hasn't gotten much use. I notice that for some odd reason, my CV/Gate voices are completely out. Nothing at all coming from them, but the Drum Gates were fine for some reason. So I figured, maybe I turned them off somehow in the MCC. Connected to MCC, nope nothing there to turn them off so it must be one of MANY bugs which really has started to piss me off, but I see theres a firmware update available, and maybe this would get rid of the bugs. Excited, I download and install the firmware update. Mid update my unit turns off completely and a message comes up on the MCC screen stating theres been an "error". Confused, I try to turn my unit on and off again and its completely dead. :'(
Arturia, this is absolutely INSANE. I was extremely excited to buy this product when it was announced and what I received is a $400 paperweight. Never have I had an experience with it where some kind of bug didn't show up. Global transpose was advertised (literally the reason I bought it) and never appeared. I will be speaking with support, but this may be one of the most disappointing and frustrating piece of gear I have ever had, and I've owned tons of vintage synths and samplers throughout my life. >:(
Three words: "W T F"
I am so sorry to hear this. I know from experience in general, that problems with your gear is never fun and very anxiety inducing. I don't think all is lost however, I do think there is a 'backdoor' loader you can enable, to get the firmware to take. I can't recall the process, but I do believe I saw it mentioned on this forum, when someone else had a problem. Support should be able to sort you out, I hope. Please do keep us informed and all the best.
-
I decided to bring out my KSP as it hasn't gotten much use. I notice that for some odd reason, my CV/Gate voices are completely out. Nothing at all coming from them, but the Drum Gates were fine for some reason. So I figured, maybe I turned them off somehow in the MCC. Connected to MCC, nope nothing there to turn them off so it must be one of MANY bugs which really has started to piss me off, but I see theres a firmware update available, and maybe this would get rid of the bugs. Excited, I download and install the firmware update. Mid update my unit turns off completely and a message comes up on the MCC screen stating theres been an "error". Confused, I try to turn my unit on and off again and its completely dead. :'(
Arturia, this is absolutely INSANE. I was extremely excited to buy this product when it was announced and what I received is a $400 paperweight. Never have I had an experience with it where some kind of bug didn't show up. Global transpose was advertised (literally the reason I bought it) and never appeared. I will be speaking with support, but this may be one of the most disappointing and frustrating piece of gear I have ever had, and I've owned tons of vintage synths and samplers throughout my life. >:(
Three words: "W T F"
I am so sorry to hear this. I know from experience in general, that problems with your gear is never fun and very anxiety inducing. I don't think all is lost however, I do think there is a 'backdoor' loader you can enable, to get the firmware to take. I can't recall the process, but I do believe I saw it mentioned on this forum, when someone else had a problem. Support should be able to sort you out, I hope. Please do keep us informed and all the best.
I think it involved patching the clock out into something...I can try that but don't see how it could work when the unit won't even power on. Thank you for your help though I appreciate it.
-
Hey guys, I managed to get it back on! So it appears, that the unit wasn't dead, but stuck in "bootloader mode" causing all the LEDs and displays to be off. Just in case this happens to anyone else, I'd like to post screenshots of the instructions Arturia Support gave me to get it back on. Now lets please get 2.0 released please!!! :P
-
My CV/Gate outputs are still not responding btw... :'(
off topic, but that was the whole reason I tried updating, and also just tried resetting to factory. Still nothing. Sigh.
-
Are the CV’s assigned to the correct sequencer track via shift + cv routing shortcut keys on the unit?
-
Hey guys, I managed to get it back on! So it appears, that the unit wasn't dead, but stuck in "bootloader mode" causing all the LEDs and displays to be off. Just in case this happens to anyone else, I'd like to post screenshots of the instructions Arturia Support gave me to get it back on. Now lets please get 2.0 released please!!! :P
I just managed to brick mine too during the update process to 2.0.0... did your solution erase your saved projects or is everything intact after the unlock from bootloader mode? Kind of worried about my projects.
-
My CV/Gate outputs are still not responding btw... :'(
off topic, but that was the whole reason I tried updating, and also just tried resetting to factory. Still nothing. Sigh.
Made in China.
-
Hey guys, I managed to get it back on! So it appears, that the unit wasn't dead, but stuck in "bootloader mode" causing all the LEDs and displays to be off. Just in case this happens to anyone else, I'd like to post screenshots of the instructions Arturia Support gave me to get it back on. Now lets please get 2.0 released please!!! :P
I just managed to brick mine too during the update process to 2.0.0... did your solution erase your saved projects or is everything intact after the unlock from bootloader mode? Kind of worried about my projects.
Just unbricked mine and I'm happy to report the projects are intact. 🎉
-
Hey guys, I managed to get it back on! So it appears, that the unit wasn't dead, but stuck in "bootloader mode" causing all the LEDs and displays to be off. Just in case this happens to anyone else, I'd like to post screenshots of the instructions Arturia Support gave me to get it back on. Now lets please get 2.0 released please!!! :P
I just managed to brick mine too during the update process to 2.0.0... did your solution erase your saved projects or is everything intact after the unlock from bootloader mode? Kind of worried about my projects.
Just unbricked mine and I'm happy to report the projects are intact. 🎉
This is awesome news! So glad for you and thanks for sharing!
-
Total relief to see this issue can be resolved!
We've got 2 x key step pros in our studio. Updated my key step pro with the latest firmware with no issues. Thought I'd help my mate out and decided to update his too.
Terrible idea! Like you guys above, the machine died on me! All light off, wouldn't power on. Going into the studio tonight so will follow the instructions Arturia have provided. Praying it resolves the issue!
-
Total relief to see this issue can be resolved!
We've got 2 x key step pros in our studio. Updated my key step pro with the latest firmware with no issues. Thought I'd help my mate out and decided to update his too.
Terrible idea! Like you guys above, the machine died on me! All light off, wouldn't power on. Going into the studio tonight so will follow the instructions Arturia have provided. Praying it resolves the issue!
Best of luck. These are stressful situations.
-
Total relief to see this issue can be resolved!
We've got 2 x key step pros in our studio. Updated my key step pro with the latest firmware with no issues. Thought I'd help my mate out and decided to update his too.
Terrible idea! Like you guys above, the machine died on me! All light off, wouldn't power on. Going into the studio tonight so will follow the instructions Arturia have provided. Praying it resolves the issue!
I'm pretty sure it'll work out fine!
Good luck.
-
IT’S ALIIIIIIVE!!!!
Cheers gents!
Phew... that was tense. Seems the machine was in bootloader mode. If this happens to anyone else, fear not, there is still hope. Your Key Step Pro is just In stasis and can be awoken from its slumber.
-
I have the same issue.
Brand new out of the box basically.
First, I powered it up once but the unit didn't do anything except showing "Keystep Pro" (or something) on the OLED. No other LEDs or screens were lighting up and none of the buttons were responsive. After about 5 minutes of this I thought maybe it will work after a first firmware update.
I opened MCC, got an error message at about 50% through the update and the KSP has been dead since.
I'm on Mac OSX Catalina
This FAQ doesn't help since neither the device nor its update are showing up again in Audio-Midi-Setup after removing the device once:
https://www.arturia.com/faq/utilization/midi-control-center-fail-to-open-the-device-on-mac-osxhttps://www.arturia.com/faq/utilization/midi-control-center-fail-to-open-the-device-on-mac-osx
I contacted support just now but as it's the weekend I guess both options - returning the unit or finding a solution - will include me sitting in front of expensive paperweight for a few days.
Can't say I'm not frustrated tbh.
I was hoping to read how you guys were able to get yours back to life as some were announcing they got theirs to work.
However, i didn't find more info than "usb disconnect, connect clock in to reset out, power on, disconnect clock, connect usb, open MCC, download FW and manually update within MMC"...
... which doesn't work for me.
Guess gotta rearrange my gear back to before KSP arrival for now.
Any help appreciated.
Thanks
-
Same thing just happened to mine. Died immediately after a firmware update. Had unit for about 18months but I've hardly used it. Probably been switched on for about 24hrs max over this time. Am also awaiting reply from Arturia.
-
Same thing just happened to mine. Died immediately after a firmware update. Had unit for about 18months but I've hardly used it. Probably been switched on for about 24hrs max over this time. Am also awaiting reply from Arturia.
This just happened to me. Firmware failed, now unable to do anything with it. Firmware wont load, MCC cant detect firmware version.. stops at 50%. Putting a cable into clock reset and in still does nothing for me. Any luck on your end?
Is this happening to anybody else? Its extremely frustrating :'(
-
Is anyone willing to share the step by step process of unbricking the unit?
I am completely new to Arturia hardware (I am not loving this start!) and have had no luck thus far restoring it to functionality.
Like many on here, tried to update the firmware out of the box and now the unit is seemingly dead, totally unresponsive.
I bought CV cables but can’t find the exact procedure. All help greatly appreciated!
-
You have to put the device into bootloader mode, using that cable trick mentioned elsewhere.
If you don't see lights when connecting the device to the computer, probably it's because it is already in bootloader mode.
Then you have to simply repeat the firmware update using the older MIDI Control Center (see this post: https://forum.arturia.com/index.php?topic=107081.msg182780#msg182780 ).
Remember also to not use any USB hubs in between!
That worked for me.