Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: momodig on May 12, 2019, 12:11:00 am

Title: bsp and volca's
Post by: momodig on May 12, 2019, 12:11:00 am

I fiddle around in the midi center, with the clock voltages but no luck... when I use the clock out from the bsp to the vocla's it plays the volcas really fast? anyway to connect or fix this with the volcas without using a midi cable?

Title: Re: bsp and volca's
Post by: megamarkd on May 13, 2019, 04:17:47 am

In MCC you need to set the BSP clock to "2PPQ (Korg)" to have the Volca run at the correct rate via the BSP clock.

Title: Re: bsp and volca's
Post by: momodig on May 13, 2019, 06:51:05 am

I did that and the volca still runs very fast.

Title: Re: bsp and volca's
Post by: megamarkd on May 13, 2019, 07:35:43 am

What sync setting have you got your Volca in? There are two speeds it responds to, one step per pulse and one step every two pulses. Maybe play around with the Korg sync settings and the BSP clock settings.
I sync my Volcas with MIDI and am not in range of them right now so can't check to see if which settings on the two machines will make them sync nicely.