Arturia Forums

Harware Legacy versions => Analog Laboratory => Analog Laboratory Technical Issues => Topic started by: zedshift on May 02, 2019, 09:25:39 pm

Title: KeyLab 88 - MIDI seems to work but no sound. Other MIDI keyboards work...
Post by: zedshift on May 02, 2019, 09:25:39 pm
I've recently upgraded Analog Lab 3 to 4, now I have no sounds.

Midi Control Center detects inbound MIDI key presses from the KeyLab 88. Sounds work with the virtual keyboard in Analog Lab.

Other MIDI keyboards (Aka MPK mini) is recognized by Analog Lab and triggers sounds correctly.

Can't figure out what's happening here but the keyboard is effectively useless as it is.

Thanks.

Title: Re: KeyLab 88 - MIDI seems to work but no sound. Other MIDI keyboards work...
Post by: MajorFubar on May 02, 2019, 09:32:12 pm
Have you changed the midi channel of your KL88 to something other than 1? This might be why other controllers like your MPK work with it, because by default they will transmit on midi channel 1. Do a hardware reset on the controller by holding down the octave ± buttons while you switch it on. Warning: this will clear all customisations.

Also check obvious things eg the KL88 is selected as the midi input device in AL4.