Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: hades856954 on January 21, 2019, 09:45:17 pm

Title: Pitch too high
Post by: hades856954 on January 21, 2019, 09:45:17 pm

Hi there,

I'm using the beatstep pro with the make noise 0-coast. I noticed that the pitch sending by beatstep is way too high, so I try to change the Seq 1 0V midi Note in Midi control center but nothing is changed… any idea?

Thanks

Title: Re: Pitch too high
Post by: megamarkd on January 22, 2019, 04:28:56 am

I recall this being brought-up before. 
Try this thread: https://forum.arturia.com/index.php?topic=93644.0

Title: Re: Pitch too high
Post by: hades856954 on January 22, 2019, 01:42:14 pm

Hi, reset the 0-coast has solved the problem, thanks! But now I've a clock out issue… sending BSP clock out to 0-coast clock Input doesn't work… seems that the signal is always on, yes I've checked the time division on drum sequencer that is set to 1/4.

Title: Re: Pitch too high
Post by: hades856954 on January 22, 2019, 02:29:56 pm

OK, I finally found the solution in the MCC by changing the Clock In/Out settings per 1step. Strange that the new value was not taken into account until I restart the BSP…