Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: Jeremiahklinger on June 24, 2017, 05:07:52 am

Title: Recording drums using roller with 2.0 update adds tied steps
Post by: Jeremiahklinger on June 24, 2017, 05:07:52 am

When using the new v2.0 roller recording feature with recording drums (like on DrumBrute), multiple tied steps are entered rather than single step events.

Title: Re: Recording drums using roller with 2.0 update adds tied steps
Post by: Valentin Arturia on June 26, 2017, 10:02:17 am

Hi Jeremiahklinger,

It is a normal behaviour. Using Roller the recorded steps will last half the time division.
If I use a pattern with a 1/16 time division and use Record-Roller :
- In 1/4 : it will record 2 steps (first tied second gate at 99) so half the pressed time div (4 steps = 1/4)
- In 1/8 : it will record 1 step (gate at 99) so half the pressed time div (2 steps = 1/8)
...

Best
Valentin

Title: Re: Recording drums using roller with 2.0 update adds tied steps
Post by: cjerome on January 21, 2018, 08:26:35 pm

- is it possible to switch off the tie function as it was before the 2.0 update?

- also when i'm using the roller function for the drum sequencer, it sounds perfect when record is of. 1/16 notes (for example) from the roller are perfectly synchronized. but if record is on, as soon as i hit any drum pad (with my other finger on the roller pad) there is always something like an extra trigger which is not synchronized... any ideas how i could fix this problem?

btw. i'm triggering a jomox airbase 99 and a jomox xbase 09, same effect with both machines..

thanks in advance!
jerome