Arturia Forums
Hardware Instruments => MatrixBrute => MatrixBrute - General discussions => Topic started by: eroxx on March 15, 2017, 01:35:39 pm
-
I have gate output on my tb-03 connected to gate input on matrix brute.
I have cv output on tb-03 connected to cv Osc 1 pitch input on matrixbrute.
When I play on the tb-03, the matrixbrute does sound, but it's the same note every time ... ???
-
Do you have a voltmeter to test the output of the tb-03?
You can test the MB using itself, patch the VCO 1 Metal out to VCO 1 Pitch in using a cv cable.
With the mod matrix route an LFO to VCO 1 metal and increase the depth, do you hear the pitch change?
-
So after about an hour of being frustrated, I pulled the CV plug SLIGHTLY out, and now it works ... Should that be the case? Could it be because its a TRS cable, and not TS? Thanks so much for the reply!
-
You should use TS cables really.
-
I don't have, otherwise I'd test - do you think that might be the issue causing me to have to pull them out a bit?
-
Could be.
-
I have gate output on my tb-03 connected to gate input on matrix brute.
I have cv output on tb-03 connected to cv Osc 1 pitch input on matrixbrute.
When I play on the tb-03, the matrixbrute does sound, but it's the same note every time ... ???
can u explain how it works i dont know much about cv gates i would like to have fun with MB to control my avalon bassline or something like that or use step step sequencer for pattern for avalon