Arturia Forums

Hardware Instruments => DrumBrute => Topic started by: moonbooter on December 19, 2016, 07:47:52 pm

Title: [SOLVED] Suddenly no sound
Post by: moonbooter on December 19, 2016, 07:47:52 pm

Hi,
this morning I got the Drumbrute for testing. I played around a while, installed the new firmware,
everything seemed fine. Then I tested some settings in the Control Center and suddenly there
was no sound coming out of the Drumbrute. I can turn on the Metronome and it´s working as ususal,
but I can no longer trigger any of the drumvoices. I check the headphone signals and individual out. Also
no signal. So I sent the factory template back. No result... still no sound.
Can anyone please help me?  ???
Btw. Filter is bypassed and open..)

Title: Re: Suddenly no sound
Post by: Terrym on December 19, 2016, 10:57:42 pm

Hi, Import my device settings in the mcc (file below) see if the sound comes back.  If not do a firmware install again.


Terrym

Title: Re: Suddenly no sound
Post by: moonbooter on December 20, 2016, 09:36:19 am

Hi Terrym,
first thanks for Your reply.
I installed the new firmware again. No Sound. I send the settings to the Drumbrute. No Sound.
Metronom is working on the outputs. The rest is silent.

Any other idea?

Title: Re: Suddenly no sound
Post by: Edouard_Arturia on December 20, 2016, 10:22:08 am

Hello.

Does your machine reacts to incoming midi ?

If yes, please try a hard reset.

If your machine is in local OFF it will fix the issue.

Best Regards

Edouard

Title: Re: Suddenly no sound
Post by: moonbooter on December 20, 2016, 02:05:03 pm

Just did a hard reset and it works  :)

Problem solved.