Arturia Forums

Hardware Sequencers => BeatStep Pro => Topic started by: IceOnTitan on October 05, 2016, 04:48:56 am

Title: Trying to sequence melodic patterns into my Moog Rogue
Post by: IceOnTitan on October 05, 2016, 04:48:56 am

Trying to sequence melodic patterns into my Moog Rogue through a Beatstep Pro and only getting the gate to function. No change in pitch. Also weird high pitch drone.

I have it setup the following way.

BeatStep-->Seq 1 Pitch-->1/8 stereo cable--.1/4 stereo jack-->Keyboard In/Out Moog Rogue
BeatStep-->Seq 1 Gate-->1/8 stereo cable--.1/4 stereo jack-->trig In/Out Moog Rogue

heres a video
https://www.youtube.com/watch?v=7CjjXeZI_T8&feature=youtu.be

Title: Re: Trying to sequence melodic patterns into my Moog Rogue
Post by: Terrym on October 05, 2016, 11:25:43 am

Hi . have you changed the Bsp gate to s trigger in the mcc?

regards

terrym

Title: Re: Trying to sequence melodic patterns into my Moog Rogue
Post by: IceOnTitan on October 06, 2016, 04:43:56 am

Yeah I changed the gate to S trigger. Again the gating is working fine, its the pitch that will not work and the high drone in the background.

Title: Re: Trying to sequence melodic patterns into my Moog Rogue
Post by: ryanjamesmcgill on November 07, 2016, 05:33:09 am

Hey I use a BSP with my Rogue as well.

It will work but it's a little tricky with the pitch. Basically, you need to ONLY send signal to the Rogue CV IN and not the CV OUT. You may also need to mess with the 1v/Octave setting in the Midi Control Center. Hope this helps!

Rogue Pitch CV In -> 1/4" TRS ---> 1/4" TS (ring) ---> BSP pitch output.