Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: calvinsomething on October 27, 2015, 09:31:52 pm

Title: Adjusting Velocity Sensitivity?
Post by: calvinsomething on October 27, 2015, 09:31:52 pm

Is there a way to adjust the sensitivity of the pad's velocity readings? I find it very difficult to record/play low velocity notes... I have to barely touch the corner of the square, making the velo->filter cutoff not nearly as useful as it could be.

Thanks if anybody can answer this!

Title: Re: Adjusting Velocity Sensitivity?
Post by: Terrym on October 27, 2015, 10:47:19 pm

Hi there is a way to do this but I'm not sure if you have access to it .
If you open the mcc  on the top bar where it says view there is a drop down with dianosis  if its greyed out you can't use it .

Ill ask  the team if you can get access to this but in there you can calibrate the pads  but you need the correct weight to do this.

let me know

Terrym

Title: Re: Adjusting Velocity Sensitivity?
Post by: Steinberger on October 27, 2015, 11:17:38 pm

A setting in MMC for various sensitivity curves would be a nice to have. Trigger Finger Pro has this.

Title: Re: Adjusting Velocity Sensitivity?
Post by: Soul_Processor on October 29, 2015, 02:11:44 pm

I agree, being able to adjust the sensitivity would be great

Title: Re: Adjusting Velocity Sensitivity?
Post by: Guy Brush on February 04, 2016, 12:09:37 am

I second that.