Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: atte on July 24, 2015, 10:33:27 am

Title: Swing + long gates makes pads forget to blink
Post by: atte on July 24, 2015, 10:33:27 am

In the drum track, pads are supposed to light up when a trigger is send. However if swing is enabled, and a pad has higher gate than 50, and the step number is either 1, 3, 5, 7, 9, 11, 13 og 15 the pad doesn't light up when it's supposed to.

For instance swing = 60 and gate length >= 85 makes the pad forget to light up...

Title: Re: Swing + long gates makes pads forget to blink
Post by: atte on July 28, 2015, 12:27:50 pm

Anyone else experience this?

Title: Re: Swing + long gates makes pads forget to blink
Post by: Terrym on July 28, 2015, 08:57:32 pm

Hi. i had a look at this and its not doing this on my machine  try clearing the pattern and start again .let me know if this fixes the problem


regards

Terrym

Title: Re: Swing + long gates makes pads forget to blink
Post by: atte on July 29, 2015, 11:12:51 am

Hi. Thank for chiming in! Unfortunately clearing the pattern doesn't help.

Here's a video of the problem:
http://www.youtube.com/watch?v=jGYLcBZUNGw

Title: Re: Swing + long gates makes pads forget to blink
Post by: Terrym on July 29, 2015, 01:49:33 pm

HI I'm not getting this but I'm on the next firmware which will be out soon so hold tight it mat resolve this issue . but please save your project to the mcc before install the firmware

regards



Terrym

Title: Re: Swing + long gates makes pads forget to blink
Post by: atte on August 06, 2015, 04:25:46 pm

Hi

Exactly the same behaviour here on latest firmware (1.1.1.6). Anyone else care to try to reproduce?