Arturia Forums

Hardware Sequencers => BeatStep Pro => Beatstep Pro - General Discussions => Topic started by: vykaar on February 06, 2015, 03:08:33 pm

Title: Changing sequence length in realtime without loss of sync
Post by: vykaar on February 06, 2015, 03:08:33 pm

Does the pro allow you to change a sequences length e.g. 8 to 6 steps and then to 12 on the fly without immediately resetting to the first step like the beatstep does?
I have just ordered the pro anyway but hope this rhythmic performance necessity has been implemented.

Title: Re: Changing sequence length in realtime without loss of sync
Post by: Terrym on February 06, 2015, 04:31:48 pm

Hi , im not 100% sure yet as i haven't had a unit to test yet .but i think you will be able to move the number of steps as the sequencer is playing with the arrow keys and shift.
but ill let you know when i get my hands on one.


regards

terrym

Title: Re: Changing sequence length in realtime without loss of sync
Post by: Jimsparks on February 26, 2015, 07:01:39 am

I'd like to see this added as well. Perhaps it could also be added to the original Beatstep through a firmware update, obviously a different key combination would be needed on the Beatstep. Some additional sequence modes including a ratchet mode (repyeat a step 'x' number of times before proceeding) would also be welcome on both models. (I think this is requested in another post on the forums).
Cheers

Title: Re: Changing sequence length in realtime without loss of sync
Post by: vykaar on June 09, 2015, 10:21:55 pm

Has terrym had a chance to check if this feature is implemented yet?
Thanks

Title: Re: Changing sequence length in realtime without loss of sync
Post by: Terrym on June 09, 2015, 10:57:41 pm

Hi all, good news is testing almost finished and the BSP should be out by the end of the month. As regards to the sequence length you can change it on the fly with last step button this does not reset the sequence but with so many sequences per project you could just setup a different length on each sequence. and just jump around live .
I know arturia are making help  videos and i may do a few my self.

regards

terrym

Title: Re: Changing sequence length in realtime without loss of sync
Post by: DBM on June 10, 2015, 01:21:45 pm

Quote from: terrym on June 09, 2015, 10:57:41 pm

Hi all, good news is testing almost finished and the BSP should be out by the end of the month.

So is this version working with 0-7 volts ? OG beatstep wouldn't go down past 1 volt ( despite data given ) so 0 volts is very important for bass parts ...

Title: Re: Changing sequence length in realtime without loss of sync
Post by: Terrym on June 10, 2015, 11:14:57 pm

Hi, yes BSP has a range of 0/7 volts .



regards

Terrym