Arturia Forums
Controllers => MIDI Control Center => Topic started by: stuey on December 17, 2014, 05:16:11 pm
-
Hi,
To echo another post on here, Beatstep is a very inspiring instrument and it's a worthy addition to the studio. Sorry chaps there's always a but i know :)
Copy and Paste in the MCC for repetitive tasks. I don't mind changing the midi value for each knob or pad, but adding the same parameters to 16 knobs is tiresome when I could easily copy and paste and change the appropriate values.
The step buttons below pitch in the MCC, can they be a bit more pronounced, perhaps a shade of blue that more reflects the hardware unit - Sometimes I can't tell if they are on or off.
Thanks, Stuart
-
This feature would be very interesting, you are right.
But there is a way to do that.
If you want to copy all memory 1 knobs CC on memory 2 for example. Simply recall mem1 on your beatstep in seq mode then press store and press pad 2. All CC of mem1 will be copied on mem2.
-
Hi Ben
Yeah, that's possible but I mean within the same preset. Lets say I want to assign all knobs with Control mode, absolute and on Channel 1. I have to repeat the same procedure for all knobs. It's easy to go back and change the CC value for 16 knobs but to edit potentially 6 values per knob can be time consuming. :)
Thanks, Stuart
-
I would agree... especially when it comes to setting the MIDI channel of all 9 encoders at once, or a different midi channel to all 9 faders at once.
NI's Controller Editor allows for highlighting of ALL encoders in a row, or buttons (using Maschine) and you can set the MIDI channel to all at once. Saves SO much time.
Please make this happen, Arturia, in a future update to MIDI Control Center. I just updated to the latest (April 2019) and this is still not possible. Thank you!