Arturia Forums

DRUMS => Spark => Spark Technical Issues => Topic started by: macmusic78 on April 13, 2012, 07:00:46 pm

Title: Can record but not receive pattern changes/Midi in logic 9
Post by: macmusic78 on April 13, 2012, 07:00:46 pm
ok - i managed to setup the iac driver go to the enviroment and cable it to th seq  out.
And yes i can record midi into logic. But laying it back:  - nothing changes - no patterns no IN preferences of spark "send midi from pads"  is on -  BUT Still shows "YES would use IAC Driver spark1 midi out but does not exist"

i also use analog factory if that is important as a master keyboard.

hope somebody can help - love spark so far .. if  it works with logic it will be great
thanks
ZEB , Berlin
(sorry for double posting but i was unsure where this belongs..?
Title: Re: Can record but not receive pattern changes/Midi in logic 9
Post by: Lisapower1 on April 23, 2012, 08:13:16 pm
Important:
make sure that you have enter the IAC's Driver Name right. exactly Like this:

Device Name: "IAC Driver"
Ports: "Spark1 Midi OUT"

if you have already a remote Controller in use in Logic (maybe with iPad or something else) then you have to remove it.

hope it helps, because i had the same issue,

And for the Envoirement Window, i see that you need to make one more connection.
1-Make a (new Instrument).
2-by click on the (new Instrument) you will see some Parameter on the left side.
3-Port must be set (Off)

cheers