Arturia Forums

Hardware Instruments => MicroBrute => MicroBrute Technical Questions - FAQ => Topic started by: FiltroAnalogico on January 22, 2014, 04:31:30 pm

Title: Connection-Manual_v1.0.3 wrong reference for Rx and Tx CC
Post by: FiltroAnalogico on January 22, 2014, 04:31:30 pm

Hi there,

I've found a wrong reference in the “MICROBRUTE_connection-Manual_v1.0.3.pdf” manual.
Values for MIDI CC 102 and 103 (respectively Rx and Tx channel setting) are described as:
•   Receive Channel (CC 102): 1 to 16, 17=All
•   Send Channel (CC 103): 1 to 16

Actually seems that MB recognizes values in the 0-127 format, resulting in:
•   Receive Channel (CC 102): values 0 to 15 set channel 1 to 16, value 16 sets the channel to ‘All’
•   Send Channel (CC 103): values 0 to 15 set channel 1 to 16
(values to be transmitted via CC need to be ‘-1’ compared to those in the manual)

Cheers

Title: Re: Connection-Manual_v1.0.3 wrong reference for Rx and Tx CC
Post by: ben arturia on January 24, 2014, 10:24:19 am

Right again !  ;D