Arturia Forums

Audio => AudioFuse => AudioFuse - General discussions => Topic started by: metamorph on February 09, 2021, 04:41:41 pm

Title: A and B speaker at same time
Post by: metamorph on February 09, 2021, 04:41:41 pm

Is it possible to enable both A and B speakers at the same time on Audiofuse studio?  I have a studio with speakers in each corner and have the need to play all speakers at once depending on where I am facing in the room.

Title: Re: A and B speaker at same time
Post by: Terrym on February 09, 2021, 11:39:07 pm

Hi
No its not possible, as the A/B  button has a relay switch

Title: Re: A and B speaker at same time
Post by: TimArturia on February 10, 2021, 09:47:06 am

Hey !

There is a trick to do it.
You can use the Phones2 to Speaker B feature.

It will allow you to use a cue mix for speakers A, and a cue mix for Phones 2 which will be redirected to the Speaker B and both should work together.
Note that when using it, the analog gain of the phones is used.

Title: Re: A and B speaker at same time
Post by: metamorph on February 16, 2021, 01:30:52 am

Oh wow! thank you thank you! this is a perfect solution for me!

Title: Re: A and B speaker at same time
Post by: in10zity on April 18, 2021, 12:20:10 am

Sweet. So in Audiofuse Studio this same issue exists. So in the Analog Outputs section of Control Center, change the Phones2 section to Main Mix  and select the SPK B button! This was driving me crazy as I often play both sets of monitors at the same time b/c they're in different positions of the room. This also works really well if you have a subwoofer and want to control it's volume in a handy place (the Cue 2 knob).