Arturia Forums

Audio => AudioFuse => AudioFuse - Technical Issues => Topic started by: dianabol102 on January 02, 2021, 10:24:30 am

Title: Audiofuse Rev2 no power on, "A" button constant flash
Post by: dianabol102 on January 02, 2021, 10:24:30 am

Video of my problem - https://www.youtube.com/watch?v=NY15n_EkWr0

USB power - unit does not boot
DC power - unit does not boot
USB + DC power - unit does not boot
Description: when trying to power on the unit, "A" button constantly flashes and headphones release intermittent on\off relay sounds.
Solutions:
1) Plug PSU while holding "A" button - it boots on emergency firmware - DID NOT HELP
2) Factory reset by holding main output CUE SELECTOR + MONO BUTTON while powering via AC adapter - DID NOT HELP

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: Terrym on January 04, 2021, 07:47:26 pm

Hi when you hold the cue and  mono button for more than 5 seconds while powering up via PSU only   if the unit is still flashing it may be in boot mode already   try plugging in the usb  after the reset if the A button is still flashing open the AFCC and see if you can false the firmware to load  if the Afcc is not seen please send a support ticket to Arturia

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: Terrym on January 04, 2021, 07:53:31 pm

Also do you get the same issue with both usb plugged in to give it more power at the computer end

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: jt2040 on September 28, 2021, 07:20:55 pm

I have the same issue. Its a very strange behaviour =(

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: Bonamici on November 30, 2021, 11:21:09 am

Hello!

I am also having exactly the same problem.

Cheers
Bon

PC/Intel Core i7 8700K/3700 MHz/32GB RAM
Arturia AudioFuse Studio
UAD2

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: Cosasterriblesmx on May 11, 2022, 02:16:41 pm

So this is a real problem for a bunch of users and no response from the arturia team whatsoever.

Where you able to get it work? Im having the same issue.

Title: Re: Audiofuse Rev2 no power on, "A" button constant flash
Post by: JoshP on May 12, 2022, 05:15:36 am

Better contact their support as soon as possible. They are very slow and will take 3 days just to get back to you. Many more for any type of ongoing conversation. Hope you don't have a studio that relies on this unit because Arturia support is not in a hurry.