Arturia Forums
Audio => AudioFuse => AudioFuse - Feature Requests => Topic started by: Boris D. on August 08, 2020, 04:53:18 am
-
Hello,
Several devices I own can't be used :
- Rode Wireless Go set of microphones.
- A lavalier jack mic
- A on-camera mic
The output is a mini jack, as all cheap and on-camera mic are.
I'm using a 2.5" to 3.5" adapter and plug it in either line or mic inputs of the Audiofuse Studio.
I have two big problems :
- It's detected as line, should be mic.
- Even with the mic input preamp gain on max, I'm not matching line level.
- The jack has to be half plugged for audio to be detected
I'm guessing this is simply a non-balanced mic input.
If it's an hardware problem I would understand, but still wanted to report it.
Edit: I found out I could use the phono input.