Arturia Forums

Hardware Sequencers => KeyStep Pro => KeyStep Pro - Feature Requests => Topic started by: synthcreep on May 26, 2020, 11:55:58 pm

Title: disable looper option
Post by: synthcreep on May 26, 2020, 11:55:58 pm

The looper control strip is unfortunately very sensitive and in a less that optimal location as it is trivial to trigger when using the pitch strips or using transpose or hold.  Would really appreciate an option to disable this strip entirely, ideally per project so a performance is not brought to a grinding halt by an accidental loop.

 

Title: Re: disable looper option
Post by: Lonzo5 on May 31, 2020, 10:47:59 am

+1

Title: Re: disable looper option
Post by: al80 on May 31, 2020, 01:54:52 pm

+1

Title: Re: disable looper option
Post by: chitlun on May 31, 2020, 05:50:15 pm

+1

Title: Re: disable looper option
Post by: gohan2a on June 02, 2020, 07:47:50 pm

+1

Title: Re: disable looper option
Post by: noise_vector on June 19, 2020, 03:36:44 pm

+1. Had this happen a couple of times during a live recording. While playing seated it's a nice place to put your hand near the loop section. Unaware of what was going on I thought the Keystep was glitching out and had to start over my recording.

Title: Re: disable looper option
Post by: marcel-x on June 19, 2020, 04:13:50 pm

+1

Disable at least the 1/4 for I touch it too often when pushing the SHIFT button.

Title: Re: disable looper option
Post by: Terrym on June 19, 2020, 10:42:41 pm

Hi All
This was one of the first things i asked for in early testing of the KSP.  I was asked by arturia a few months back for a possible shortcut option
So i am hopeful it will be in a near future update.

Title: Re: disable looper option
Post by: elektikpete on March 13, 2021, 12:30:57 pm

+1