Arturia Forums

Hardware Instruments => MatrixBrute => MatrixBrute - Technical Issues => Topic started by: Simatik2018 on April 30, 2020, 11:06:56 am

Title: Preset / SEQ & MOD Knobs behaviour after V2
Post by: Simatik2018 on April 30, 2020, 11:06:56 am

Dear MB Users,

someone mentioned this also a few months ago, after the V2 Update these three soft knobs
do have an other behaviour then before.

You load a Programm/Sound wait until the Sound is completely loaded and then you want
to switch to e.g. to the SEQ or MOD Pages...you have to push these knobs twice to react. Even when you
push them Right in the middle with enough force. After the second push the pages are
switching and then one push is enough to jump trough These three pages PRESET / SEQ & MOD.

I have checked all the inside boards for the correct update Status, everything is fine.

But this behaviour sucks, can someone from you MB users confirm that behaviour?

Thank you :-)

Best Regards

Lars

Title: Re: Preset / SEQ & MOD Knobs behaviour after V2
Post by: yeskeys on April 30, 2020, 06:31:22 pm

Yes, i am seeing the same thing.  I have to press twice on the main 3 buttons to make them react.

Title: Re: Preset / SEQ & MOD Knobs behaviour after V2
Post by: aWc on April 30, 2020, 06:40:32 pm

I don't have this problem on my V2 MatrixBrute...

Title: Re: Preset / SEQ & MOD Knobs behaviour after V2
Post by: minus_ego on April 30, 2020, 06:53:00 pm

Mine is not exhibiting this behavior.  Have you tried re-installing the latest firmware?  Seems obvious, but may be worth a try.

Title: Re: Preset / SEQ & MOD Knobs behaviour after V2
Post by: Simatik2018 on May 06, 2020, 11:03:13 am

Dear you All,

thanks for the Feedbacks :-)

Yes I have reinstalled the V2 Update and after this is have manually checked
the pcb boards update states. All are fine and on V2.xy

After some more Investigation I can say that this behaviour mostly happens on
Patches/Programms with SEQ or ARP records/data.

Older MB Patches before V2, are working really better. Mostly on the Arturia V2 factory
Patches this behaviour happens (with SEQ & ARP data).

Stay tuned.

Best Regards

Lars