Arturia Forums

Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: tweetch on February 28, 2020, 10:36:00 pm

Title: [newbies issue] midi issue BSP and drumbrute impact
Post by: tweetch on February 28, 2020, 10:36:00 pm

Hi  / bonjour à tous
midi channels config is the native one on the BSP and the DBimpact.
in control mode on the BSP : I can trigger the 10 instrument of the drumbrute. no issues
in "drum mode" i only have the paD N° 1 kick working and the 15 et 16 also working....
why ?
i'v set the midi chan in the midi ctrl center from 1to 10... but it still not working...
please help ...

Title: Re: [newbies issue] midi issue BSP and drumbrute impact
Post by: megamarkd on February 29, 2020, 03:22:47 am

Have you created a custom drum map for the Impact?

Title: Re: [newbies issue] midi issue BSP and drumbrute impact
Post by: tweetch on February 29, 2020, 12:04:19 pm

yes
i try to set every pad on a different midi chan (passing from "user" to 1 to 10 midi chan...
nothing work

Title: Re: [newbies issue] midi issue BSP and drumbrute impact
Post by: megamarkd on March 01, 2020, 06:28:46 am

You need to set the pads to the same channel as your Impact.  As for the notes to set your BSP custom drum map to, the Impact follows the regular standard of starting a percussion map at MIDI note number 36 for the first kick, then continues up the instrument list from there (have a good read of the manual for finer details and how to change the Impact note map).  Set the MIDI note numbers of your custom drum map to 36 and above and assign them the same MIDI channel as your Impact, and that should have you running playing the instruments on the Impact with your BSP no worries!