Arturia Forums
Hardware Instruments => MiniBrute => MiniBrute Technical Questions - FAQ => Topic started by: phk on May 31, 2013, 07:21:32 pm
-
Hi
Just received my second Minibrute today, first one had the "raised middle C key" -problem and this one seems to have another problem... :(
The MOD-wheel seems to be faulty.
It first kicks in when at appx. 25% and with full power.
The dump from MIDI monitor below confirms this (I moved then wheel from 0 -100% and back a few times).
Edit: I upgraded the FW to 1.0.2.1 but that didn't help.
19:40:09.473 From MiniBrute Control 1 Modulation Wheel (coarse) 127
19:40:09.473 From MiniBrute Control 1 Modulation Wheel (fine) 127
19:40:12.824 From MiniBrute Control 1 Modulation Wheel (coarse) 0
19:40:12.824 From MiniBrute Control 1 Modulation Wheel (fine) 0
19:40:13.639 From MiniBrute Control 1 Modulation Wheel (coarse) 127
19:40:13.639 From MiniBrute Control 1 Modulation Wheel (fine) 127
19:40:15.045 From MiniBrute Control 1 Modulation Wheel (coarse) 0
19:40:15.045 From MiniBrute Control 1 Modulation Wheel (fine) 0
/Peter
-
The mod wheel on my minibrute starts to come in at about the 25% mark. Also I have to be very careful if I want just a little bit of modulation. Hopefully one of the Mods will chip in and put your mind at rest.
-
The mod wheel on my minibrute starts to come in at about the 25% mark. Also I have to be very careful if I want just a little bit of modulation. Hopefully one of the Mods will chip in and put your mind at rest.
Thanks for your reply :)
I'm returning the synth, the wheel simply works as an on/off switch which it shouldn't.
See further down.
-
you have a mail phk; if the tools don't resolve your problem change your MB.
-
you have a mail phk; if the tools don't resolve your problem change your MB.
Thanks!
Problem solved by calibrating the wheel.
Now fully enjoying my new synth 8)