Arturia Forums
V Collection - Legacy versions => CS-80V => CS-80V Users Community => Topic started by: omissis on April 01, 2005, 10:01:18 am
-
BUG FIXINGS REQUIRED
Ringmodulator:
1. reshape the sine wave( on the real thing it's a way between a [edit] sine and a triangular )
2. remove the "PWM" artifact at low MOD rates, ( undesired harmonic subtraction phenomenon ) DONE!!
3. better tweak to the MOD parameter's behaviour ( actually doesn't work as on the real ringmodulator ) DONE!!
4. the DEPTH function doesn't "remember" its position , so to cause a wrong modulation with the AD envelope DONE!!
5. make the AD levers work in real-time ( actually don't work ) DONE!!
6. sometimes the envelope modulation is triggered even with the DEPTH lever set to zero DONE!!
Filters:
1. when both HPF and LPF are active you couldn't set filter's Attack time under 1 ms: when the setting is like this the synth won't produce sound ; please fix it!!! DONE!!
2. it seems there's a small amount of Resonance going into the signal path even if the Res sliders are set to zero ( happens both with 12dB/Oct and 24 db/Oct ) DONE!!
PORT/GLISS slider :
make it work in real time! DONE!!
Ribbon :
1. eliminate the glided return after the bending has been done DONE!!
2. Set it with "pressed note priority" when SUSTAIN I is active DONE!!
Sub Osc :
Better tweak the VCA amount control : it clips the thing to death when set at high values! DONE!!
GENERAL FIXINGS REQUIRED ( including GUI ) :
1. less digital stepping
2. remove crackles and pops when moving sliders DONE!!
3. Initial Pitchbend wrongly works ( please reduce the way too deeper response at high values) DONE!!
4. Restore a correct color code for the panel presets ( FUNKY 1-2-3-4 = GREEN, ORGAN 1-2 = WHITE , GUITAR 1-2 = YELLOW ) DONE!!
5. Are the moving fans really this useful ( on the original there was no trace of them :wink: ! ) ? You could take them off to make room for the additional Transpose and Fine controls ( ok, this is only a personal opinion :oops: - M )
6. [added Fri ,29 Apr, 2005] Chorus/Tremolo and Delay : the section has a strange behaviour, for example with Ch and Del ON it seems the Ch affects the delayed signal only, not the dry, with both Ch/Tr ON the dry signal disappears and with the Mix parameter at zero there is no sound at all ! Also, the Chorus doesn't sound quite similar to the original
(partially) DONE!!
FEATURES' REQUEST
1. Freerunning oscillators! maybe on version 2.0
2. Fine tuning and Transpose for each single VCO per voice card
( partially done, a tuning for each single vco implies a deep redesign of the synth )
3. Redesigned waveforms ( for sawtooth , square and sine-same for the ringmodulator's wave )
( done on sawtooth, coming soon for the others)
4. More MIDI controls for Arpeggiator ( Note priority, Channel Aftertouch, Velocity... to destination Tempo )
5. Individual Arpeggiator for each zone !!
6. Set a better Up/Down /U-D mode ( or add a classic Roland-style u/d mode )
7. Matrix, new destinations : RingMod MOD, Pan , [added Fri ,29 Apr, 2005] new source : Ringmodulator's sine wave
8. External input as Sub Oscillator Waveform ( as on the original ) ( maybe on v 2.0 )
9. Useful to have the ability of patch saving for each synthesis line ( as on the original )
More to come :wink:
Any request in Technical Issues
thread : http://forums.arturia.com/forums/viewtopic.php?t=851
-
7. MIDI control for Matrix knobs
I believe this is already implemented, no?
-
OOPPSS !!! :oops: :oops: :oops:
Yup, you're right ! I will remove it from the list now!
-
Xavier will be very happy to read this post :roll:
Thanks again, Max !! :lol:
-
He was :twisted: :twisted: :twisted: waiting for it and couldn't sleep about it!
:mrgreen: :mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:
-
Anyway I think it's the most thorough analysis one could ever do: now Xavier has clear what the bugs are ( for the least :wink: :wink: )
-
Here's a re-post from an earlier thread. Can someone confirm this behavior? If so, perhaps it should be added to the bug fix list.
I don't know if this has been covered before, but there may be a problem with the Chorus and Tremolo implementation.
When Chorus is turned on I hear the chorus effect. But if Delay is also turned on, the chorus effect almost disappears from the main signal. The echos have the full chorus effect, but not the main sound. In other words, If Delay is on Chorus only effects the delayed signal, not the primary signal.
If Delay is on and Tremolo and Chorus are both on, the primary sound completely disappears. Tremolo and Chorus are applied correctly, but only to the output of the delay circuit. The primary signal disappears.
-
You're right bg, I don't like that behaviour too but rather than a bug it seems to me maybe that was a precise choice when they decided how to implement the delay! Frankly anyway, I can't explain that behaviour :shock: :shock: :roll: ....Another that I call a bug or a bad code is the Chorus itself which sounds different from the original Chorus unit.....the usual example is UK's Alaska :roll: :roll:
-
Hi guys
I just wanted to tell you to be prepared for the new update, Xavier is working harder than ever and many of us will be happy!!!
:D :D :D :D
-
hope it will happen very soon :D
I just got a killer PC :twisted:
-
It will be worth the wait, :D :D sure!!